Bastelei , Hardware Dual-Boot-Systeme

Charlito

Stammgast
Mehrere Betriebssystem in ein PC Überblick

Virtuelle Maschinen , z.B. mit VM Ware, VirtualBox, V Center, usw, laufen autonom als eigenständiges Betriebssystem in einem Programmfenster.
Nachteile: sie nehmen vom Hauptsystem Rechenleistung und Speicher, d.h. die zwei oder mehr laufenden Systeme müssen sich die verfügbare Hardware teilen.
Wenn ganze Rechenleistung zur Verfügung stehen muss, z.B. Spielen, CAD oder andere 3D-Beschleunigung, kommen Multi- oder Dual-Boot-Systeme zum Einsatz (Virtuelle Maschinen haben nur eine virtuelle Grafikkarte)

(Multi- oder) Dual-Boot-Systeme kann man per Bootloader-Eintrag auswählen, womit der PC startet: beispielsweise Windows 7, Windows 10 oder eine Linux-Distribution.
Mit zwei Windows ist alle Onboard, zweite Windows installieren (benutzerdefinierte Installation nur für Windows, fortgeschritten) und erste Windows erstell der Boot-Eintrag
Auch auf einem modernen UEFI-System lässt sich ein Multiboot mit Windows 7, Windows 10 und sogar Linux einrichten. Für die Installation von Windows 7 ist zu beachten, dass nur die 64-Bit-Variante den UEFI-Bootloader enthält. Zudem muss UEFI angeschaltet sein, aber Secure Boot abgeschaltet sein. Die Festplatte sollte bereits die GPT-Partitionstabelle aufweisen.
Man muss den Schnellstart/ Ruhezustands deaktivieren und sogar SSD-Cache für die Intel-Festplatte auch deaktivieren
Das Prinzip ist, dass man jeweils nur ein Betriebssystem verwenden kann. Wenn Windows 7 und 10 in Dual-Boot sind, will Microsoft zwei Lizenz haben.

Man kann auch mit der Bootreihenfolge von dem UEFI/BIOS auswählen, welche Betriebssystem gestartet werden soll, ohne Bootloader, wenn zwei Betriebssystem vorhanden sind und vorübergehend benutz möchte

Kommen wir zur Sache!

Ich wollte testen ob ein sog. Hardware Dual-Boot-Systeme immer noch heute funktioniert (Bastelei)
Früher hat man mit ein Abnehmbare Einschub SATA Festplatte Rack gelöst (zwei, oder mehr, Festplatte mit verschiedene Betriebssystem)
Ich habe gefunden, Google sein Dank, dass heute mit ein Umschalter (Ein-Ein) und ein SATA zu 2x SATA Y-Stromadapter realisierbar ist.
Zum anderen benötigen natürlich einen Ort, wo Sie das zweite Betriebssystem installieren können, also eine eigene Festplatte (Partitionieren geht nicht)
Also eine Festplatte einbauen, ein Betriebssystem installieren, Festplatte wegnehmen, andere Festplatte einbauen, andere Betriebssystem installieren, dann die weggenommene wieder einbauen, nach Schema verdrahten und schon kann man beide unabhängig voneinander booten.

https://www.bilder-upload.eu/bild-239c67-1580765771.jpg.html

Einschränkung:
Das funktioniert mit ein Desktop-PC mit SATA Anschluss (Laptop mit SATA-Anschluss und zwei Festplatte ist realisierbar, wenn nur eine linke Hände haben)
Eigene Dateien (Bibliothek) die in Festplatte mit ein Betriebssystem sind, kann nicht mehr, mit andere Betriebssystem zugreifen. Man kann nur mittel extern Medium kopieren (USB-Stick/Festplatte, NAS, usw)

Hier ein Beispiel mit Windows 10 neben ein vorhandenes Windows 7 auf eine separate Festplatte Installation (Desktop-PC vom 2014 mit getrennte Festplatte für Bibliotheken).
Windows 7 auf neue Festplatte klonen
Neue geklonte Festplatte in PC einbauen und alte Festplatte zur Seite legen
Neue geklonte Festplatte in PC mit Windows 7 auf Windows 10 upgraden und mehrere Male updaten
Gemäss Schema die zwei Festplatte mit Windows 7 + 10 verdrahten

Schalter Position Windows 7 und das neu gekaufte Lizenz für Windows 7 eintragen
Windows 7 auf unnötigen Programme und Müll befreien und Aktualisieren.
So kann man Programme, die mit Windows 10 nicht mehr laufen, weiternutzen
Man brauch kein UEFI/BIOS/Windows Anpassung, einfach, bei je System wechseln, richtig herunterfahren, kleine Moment warten, Schalter positionieren und neu starten.
Wenn möglich mit Windows 7 Offline bleiben
Kosten: Lizenz für Windows 7 = CHF 13.- (Lizenzen sind neu ungebraucht aus Volumen Vertrag, Wahrscheinlich nicht Gratis-Upgrade fähig) + Umschalter (Ein-Ein) = CHF 5.- + SATA zu 2x SATA Y-Stromadapter = CHF 16.-
TOTAL = zirka CHF 35.-

Fotos

https://www.bilder-upload.eu/bild-5bd320-1580765899.jpg.html

https://www.bilder-upload.eu/bild-3aaabd-1580765966.jpg.html



https://www.bilder-upload.eu/bild-42c45c-1580766026.jpg.html

https://www.bilder-upload.eu/bild-92daa9-1580767649.jpg.html

https://www.bilder-upload.eu/bild-5b501a-1580766198.jpg.html

https://www.bilder-upload.eu/bild-71670e-1580766245.jpg.html


Einzelnachweise
Some people want to use multiple operating systems and often they do not want to buy multiple computers for that purpose. So, they install multiple OSes on one computer. This works well if all the involved OSes are aware of each other and try not to interfere with each other.
In practice this is not always the case. There are OSes which always want to reformat hard drives of (to them) unknown file systems. There are updates, which rewrite the boot loader code in such a way, that the other OS is not bootable anymore. So, I wanted a hardware way to disallow any interference between the two OSes.

https://www.bilder-upload.eu/bild-960b98-1580766324.jpg.html


The idea is, that there are two hard drives in the computer, with one operating system on each. Both are connected to the motherboard via SATA data connector cables, but only one at a time is connected to the power supply unit. If a hard drive does not have power, it can neither read nor write data. It can’t event power up its controller to tell the motherboard that it is there.
Note that we only need to switch the actual power cables and not the black ground cables. Ground alone does not provide any power and plugging in only ground is not harmful to the hard disk drives.
The parts I used are a SATA power Y cable and a 3xOn/On switch. On the tool side you need scissors to cut the cables and soldering stuff to put them back together in the way you want. Furthermore, you need a continuity tester (present in most mustimeters) to make sure, you soldered this correctly. If the wrong voltage arrives at the wrong pins of a hard drive, it will probably break. If you solder a power cable to ground, your PSU might break or even explode. Potentially other parts of your computer are also in danger. So please be very careful if you try this at home.

https://praxistipps.chip.de/windows-7-aktivierung-umgehen-so-klappts_37326

Gruss, Charlito
 
Zuletzt bearbeitet:
Oben